applications and Specifications of HALAR/HMWPE Cables

·        HALAR / HMWPE cables are used as deep anode lead wires where chlorine and hydrogen gases are generated

·        The cable can be directly installed in fresh, brackish, or salt waters

·        Conductors are stranded bare or tinned copper conductor conforms to ASTM Spec B-3 and B-8

·        Primary installation is a homogeneous 20 mil wall of natural ECTFE fluoropolymer (HALAR) shall be extruded around the conductor

·        Jacket is a 65 mil wall of high molecular weight polyethylene (HMWPE) shall be extruded around the primary insulation

·        The jacket conforms to ASTM Spec D 1248