how to choose tank anodes

Traditionally many vessels are fitted with sacrificial anodes for external protection (hull). For achieving the same protection of the internal construction of the vessel (mainly water ballast tanks) sacrificial anodes can also be used. However, due to the fact that tanks are inherently complex structures as well as being confined spaces, the use of anodes has to be well engineered and the following rules adhered to:

1. Effect of ballast tank anodes the ballast tank anodes will be without effect when the ballast tanks are empty. It will take some time to obtain full effect (polarization) of submerged steel surfaces after filling with seawater. In the allege space or under deck area on top of tanks the anodes will not be effective unless the tank is completely filled.

2. The use of zinc / aluminum or magnesium alloy anodes. Anode alloy materials based on zinc or aluminum are acceptable, magnesium alloy is not allowed. Ballast tanks adjacent to tanks for liquid cargo with a flash point < 60° C are to be considered as dangerous areas. Aluminum alloy anodes are to be located in such way that the kinetic energy which is developed in case of loosening and falling down will be < 275 J. This means that in these areas the maximum height (in mtr) of an aluminum anode above tank bottom, deck or stringer may not exceed the value obtained by “28 / W”, where “W” is the gross weight of the anode. Furthermore classification societies may require structures to be installed to protect the aluminum anodes from being hit by falling objects. Please consult your local surveyor / classification society branch office for full details.

3. Welding or bolting type anodes for a good operation of the anodes it is vital to have a good electrical conductivity between the ship structure and the anodes. This can be obtained either by welding (preferably) or bolting the anodes to the ship structure. In case bolting type anodes are requested the optional “M” clamps can be used.